Product
Slotted round head wood screws, raw steel, DIN 96 standard, size Ø4.5x40mm, supplied in boxes of 200 pieces. Designed for robust wood-to-wood or hardware-to-wood connections in carpentry, joinery, and general woodworking.
Specifications
- Made from raw (uncoated) steel with a domed, slotted round head for use with a flat-bladed screwdriver.
- Complies with DIN 96 standard for slotted round head wood screws; dimensions: diameter 4.5 mm, length 40 mm.
- Aggressive partial thread ensures strong penetration and grip in wood, forming reliable joints. Head remains visible after installation.
Usage
Position the screw at the desired location on your wooden workpiece. Drive it in with a flat-bladed screwdriver, allowing the sharp thread to cut and secure itself into the wood. Suitable for applications where a protruding, decorative head is acceptable or required.
FAQ
-
What type of screwdriver is needed for installation?
A flat-bladed (slotted) screwdriver is required for these screws.
-
Are these screws suitable for outdoor use?
As they are made of raw steel and not coated, they are primarily intended for indoor use or dry environments.
-
Can these screws be used in hardwood?
Yes, but pre-drilling a pilot hole is recommended to prevent splitting in dense woods.
-
Do the heads sit flush with the wood surface?
No, the round head is designed to protrude above the surface.
-
How many screws are included per box?
Each box contains 200 pieces of Ø4.5x40mm slotted round head wood screws.
mvm-dt-2025-07-07
