Call from Monday to Friday
8:30 a.m. to 5:30 p.m.
(BE) +32(0)71 25 85 81
(LU)+352 20 30 15 72
Steel wool in Grade 1 coarseness, supplied in a generous 6 kg format, designed for surface preparation, cleaning, and finishing tasks across a wide range of materials.
Apply steel wool directly to the surface using manual pressure in circular or linear motions. Grade 1 is suited for light rust removal, paint stripping preparation, cleaning metal surfaces, and smoothing wood between finishing coats.
What does Grade 1 steel wool mean? Grade 1 refers to a medium coarseness level. It is coarser than Grade 0 or 0000 and is used for tasks such as removing light rust, cleaning surfaces, or stripping old finishes.
Can this steel wool be used on wood? Yes, Grade 1 steel wool can be used on wood surfaces, particularly for stripping old varnish or paint layers before refinishing.
Is 6 kg a standard quantity for professional use? Yes, the 6 kg bulk format is designed to meet the demands of professional tradespeople or workshops requiring a consistent and ongoing supply of abrasive material.
Can steel wool be used wet or dry? Steel wool can be used both wet and dry. When used with cleaning agents or solvents, it can improve effectiveness on stubborn residues or rust.
Does steel wool leave residue on surfaces? Fine steel particles may remain on the surface after use. It is recommended to clean the surface thoroughly after application, especially on wood, to prevent rust staining from trapped fibers.
mvm-dt-2026-03
