DESIGN 100T extractor with switch and timer per piece

Product

The Aldes DESIGN 100T is a compact axial spot extractor fan for controlled mechanical ventilation, equipped with manual switch and adjustable timer. Ideal for intermittent extraction in bathrooms, toilets, or laundry rooms.

Specifications

• ABS body and decorative façade grille
• Low-noise motor with typical sound levels from 26 dB(A)
• IPX4-rated protection, class II electrical insulation, 230 V – 50 Hz
• Removable backdraft damper at rear
• Adjustable timer operation (preset from 2 to 30 minutes)
• 100 mm diameter, ultra-flat design
• Energy-efficient operation (power consumption: 5.6 W)

Usage

DESIGN 100T is installed on a wall or ceiling to ensure quick and effective extraction of stale, humid air from small rooms up to 7 m². Activate using the integrated switch: the fan runs for the preset duration and shuts down automatically thanks to the timer.

FAQ

1. What is the maximum airflow rate of the DESIGN 100T?

   • The DESIGN 100T typically offers efficient extraction suitable for small rooms up to 7 m².

2. Can the operating time of the timer be adjusted?

   • Yes, the timer can be preset anywhere between 2 and 30 minutes.

3. Is the product suitable for humid environments?

   • Yes, with IPX4 protection, it is designed for use in bathrooms and similar spaces.

4. Does the fan include a backdraft damper?

   • Yes, a removable backdraft damper is integrated at the rear.

5. How noisy is the DESIGN 100T during operation?

   • It features a low-noise motor, producing approximately 26 dB(A) sound pressure level.

mvm-dt-2025-07-20