Tesa Double-Sided Non-Woven Tape 25 mm x 50 m

Product

A double-sided adhesive tape with a non-woven carrier, designed for permanent bonding of metallic and plastic materials. Available in a 25 mm width and 50 m roll length under reference 51570.

Specifications

• Non-woven fabric carrier with double-sided adhesive coating
• Tape width: 25 mm — Roll length: 50 m
• Designed for permanent mounting applications on metal and plastic surfaces
• Solvent-based adhesive system for reliable, long-lasting adhesion
• Suitable for indoor use and light industrial assembly tasks
• Conforms to irregular surfaces due to the flexible non-woven support

Usage

Unroll the tape and apply it to one clean, dry surface. Remove the release liner and press firmly onto the second surface. The non-woven carrier allows the tape to conform slightly to surface contours, ensuring consistent contact and a durable permanent bond.

FAQ

1. What surfaces is this tape compatible with? — It is designed for bonding metallic and plastic materials, provided surfaces are clean, dry, and free of dust or grease.
2. Is this tape removable after application? — No. This tape is formulated for permanent mounting and is not intended for repositionable or temporary applications.
3. What is the roll size? — The tape measures 25 mm in width and comes in a 50 m roll, reference 51570 by tesa.
4. Can this tape be used outdoors? — It is primarily designed for indoor and light industrial use. Outdoor performance may vary depending on exposure conditions.
5. How should surfaces be prepared before application? — Surfaces should be thoroughly cleaned and degreased to ensure optimal adhesion. Applying light pressure after bonding improves contact quality.

mvm-dt-2026-03