Wheel guards, brackets, supports, stops, guides for 1 door max. 1.5m, bottom U guide profile mounting

Usage

This hardware set is designed for mounting and guiding an external sliding door up to 1.5 meters wide, using a lower guide profile. Suitable for both residential and commercial exterior applications where space-saving access or room separation is required.

Advantages

• Provides smooth, stable movement for a single sliding door panel.
• Supports different configurations with angle brackets, stops, and guides included.
• Suits doors with various mounting needs thanks to adaptable support elements.
• Ensures proper alignment and prevents excessive swinging via the lower guide rail system.
• A dedicated kit per door is needed—multiple doors require multiple kits (may increase installation complexity).

Specifications

• The set includes rollers (single or double), angle brackets, supports, end stops, bottom guides, and necessary fasteners; compatible with an inferior guidance profile system[1][7].
• Main components typically made from steel or synthetic materials with ball bearing rollers for long-term smooth operation; non-corrosive finishes are standard in external products[1][9].
• Designed for one leaf up to approximately 20–30 kg (single or double roller variant) and maximum door width of 1.5 meters[1]. For heavier doors or longer spans, check specific capacity before installation.
• The assembly ensures secure tracking above on the supporting rail while the bottom guide maintains lateral stability; compatible with standard sliding rails commonly used in exterior settings[4][7]. Adaptable setup covers straight-line movement only without provision for curves or bi-parting designs.

How it works

This complete fitting kit mounts directly to a single sliding door panel. Rollers are attached at the top edge of the door which then run smoothly along an overhead track. A lower guide fixed into a floor-mounted channel keeps movement linear while included stops control travel limits at each end of operation[4][6]. The result: effortless manual opening and closing of large exterior panels without obstruction or jamming when properly installed.