Pandser ZK-B Self-Adhesive EPDM Butyl Tape 200mm x 10m

Product

The Pandser ZK-B EPDM Self-Adhesive Strip is a 200 mm wide, 10 m long sealing tape designed for weatherproofing and vapor control around frames, gutters, and thresholds. Its full-surface butyl adhesive eliminates the need for additional glue during installation.

Specifications

• Made from 1.3 mm thick, reinforced EPDM with a continuous self-adhesive butyl layer
• Delivers permanent elasticity and high tear resistance
• UV-resistant and waterproof, ensuring reliable long-term performance
• Immediate adhesion upon application with high initial tack
• Equipped with a two-part protective film on the butyl layer for efficient handling
• Estimated service life of 40 years

Usage

Apply the strip directly to clean, dry surfaces where wind, water, or vapor sealing is required—such as window and door frames, gutter joints, or beneath thresholds. Remove the protective film in two steps for precise placement and strong, immediate adhesion.

FAQ

1. What are the main applications of this EPDM strip?
   It is used for airtight and watertight sealing of frames, gutters, and thresholds in both new builds and renovations.

2. Is additional adhesive required during installation?
   No, the full-surface self-adhesive butyl layer provides secure adhesion without extra glue.

3. How long will the strip remain effective after installation?
   The product has a service life of up to 40 years under normal conditions.

4. Does the material withstand UV exposure?
   Yes, the EPDM material is UV-resistant and suitable for outdoor installations.

5. How do I install the strip for the best results?
   Ensure surfaces are clean and dry, remove the two-part protective film, and apply the strip with firm pressure for immediate adhesion.

_{mvm-dt-2025-07-07}