UNI Connector for SM and COB LED 8/10mm 2m Cable 3A / pce

Product

Universal connector designed for 8mm and 10mm SMD and COB LED strips, supplied with a 2-meter stripped cable, supporting up to 3A for reliable low-voltage lighting connections.

Specifications

• Compatible with both SMD and COB LED strips in 8mm and 10mm widths
• Supports 12V DC and 24V DC systems with a maximum current of 3A, allowing up to 36W at 12V or 72W at 24V
• Transparent housing allows light to pass through without obstruction
• Includes a 2-meter pre-stripped cable for straightforward wiring
• Tool-free clip-on installation with screw-tightened contacts for a secure connection

Usage

Clip the connector directly onto the LED strip, align the contacts with the strip's copper pads, and tighten the connector screws to secure the connection. The 2-meter cable then routes to your power supply or distribution point, making it suitable for under-cabinet lighting, display cases, and similar installations.

FAQ

1. Is this connector compatible with both SMD and COB strips? — Yes, it is designed to work with both SMD and COB LED strips measuring 8mm or 10mm in width.
2. What is the maximum power this connector can handle? — It supports up to 3A, which corresponds to 36W on a 12V system or 72W on a 24V system.
3. Does the transparent housing affect light output? — No, the transparent casing is specifically designed to allow light to pass through without significant interference.
4. Is any special tool required for installation? — No tools are required to clip the connector onto the strip; only a basic tightening of the connector screws is needed to secure the contacts.
5. What is the length of the included cable? — The connector comes with a 2-meter pre-stripped cable ready for connection to a power source or distributor.

mvm-dt-2026-03