Stainless Steel 304 18/8 Hinge 86 x 100 mm Secured Axis L&L Right / pce

Product

Stainless steel hinge (paumelle) in AISI 304 18/8 grade, measuring 86 x 100 mm, featuring a secured axis with right-hand configuration, designed for doors in demanding or intensive-use environments.

Specifications

• Material: Stamped AISI 304 stainless steel (18% chromium, 8% nickel), finely brushed finish
• Dimensions: 86 x 100 mm
• Secured axis: Transverse pin prevents axis from falling, even under high pressure
• Beveled axis: Facilitates door installation, including configurations with up to 4 hinges
• Lubrication: Factory-applied non-stick, freeze-resistant grease that does not dry out over time
• Optional upgrade: Ball bearing available, recommended for doors fitted with a door closer or subject to intensive use
• Recommended fixings: 8 stainless steel SPAX screws, Ø 4.5 mm or Ø 5 mm (not included)
• Brand standard: L&L quality certification
• Reference: 125505

Usage

Install this hinge on interior or exterior doors requiring reliable, corrosion-resistant pivot points. The beveled axis simplifies fitting, and the secured pin ensures the axis remains firmly in place during operation, making it suitable for both standard and high-traffic door applications.

FAQ

1. What grade of stainless steel is used? — The hinge is made from AISI 304 18/8 stainless steel, containing 18% chromium and 8% nickel, offering good corrosion resistance for most environments.

2. What does "secured axis" mean? — A transverse pin locks the axis in place, preventing it from dropping out even when the door is under significant pressure or stress.

3. Is a ball bearing included? — No, the ball bearing is an optional upgrade. It is recommended when the door is equipped with a door closer or used intensively.

4. What screws are required for installation? — Eight stainless steel SPAX screws with a diameter of Ø 4.5 mm or Ø 5 mm are recommended. These are not included with the hinge.

5. Can this hinge be used with multiple hinges on the same door? — Yes. The beveled axis design specifically facilitates installation even when four hinges are used simultaneously on a single door.

mvm-dt-2026-03