Your cart
There are no more items in your cart
End Cap for Trend 15x15mm LED Profile per piece
€0.66
In stock
Product
The Premium COB LED Strip 25m x 8mm (Ref: 587015) is a 24V warm white continuous lighting solution delivering 1180 lm/m at 13W/m, designed for seamless linear illumination without visible diode points across a full 25-metre roll.
Specifications
- COB (Chip-on-Board) technology produces a uniform, dot-free light line within a slim 8mm-wide flexible strip
- Operates at 24V DC with a power consumption of 13W per metre and a luminous output of 1180 lm/m in warm white
- IP20 rating, suitable for dry indoor environments only
- Extended lifespan compared to traditional SMD LED strips, with lower energy consumption for equivalent output
- Cuttable every 50mm at clearly marked intervals, allowing precise custom lengths for any installation
- Pre-wired on both sides for quick and straightforward electrical connection
- Self-adhesive backing for easy mounting on flat, clean surfaces
- Total roll length of 25 metres
Usage
Peel off the adhesive backing and apply the strip to a clean, dry surface such as aluminium profiles, shelving, coves, or furniture recesses. Cut at any 50mm mark to match the required length. Connect the pre-wired leads to a compatible 24V DC power supply. For longer runs or complex layouts, use appropriate COB strip connectors. Pair with an aluminium profile and diffuser for an even more refined continuous light effect.
FAQ
- What makes COB LED strips different from SMD LED strips? COB strips place the LED chips extremely close together under a single phosphor layer, producing a smooth, continuous line of light with no visible hotspots, unlike SMD strips where individual diodes can be seen.
- Can I cut this strip to a shorter length? Yes, the strip can be cut every 50mm at the designated cutting marks, so you can tailor it to virtually any length your project requires.
- Is this strip suitable for bathrooms or outdoor use? No. With an IP20 rating, this strip is designed exclusively for dry indoor environments and must not be exposed to moisture or water.
- What power supply do I need? You need a constant-voltage 24V DC driver. For a full 25m roll at 13W/m, the total load is 325W, so select a power supply rated at least 20% above that value to ensure reliable operation.
- Does the strip come ready to connect? Yes, it is pre-wired on both ends, allowing direct connection to a power supply or compatible controller without soldering.
mvm-dt-2026-03
