Tailored signboard

Board made of polyethylene, covered on both faces by aluminium foil. 3 mm thick (Diabond type)
Stiffness and resistance enhanced compared to classic PVC-foam Forex board
Maximal size of one board: 133x290 cm in portrait or landscape format

Warning: If the desired dimensions exceed those of the unit size of a panel, the panel will be provided in multiple parts to be assembled on site

PVC-foam board 3 mm thick (Forex type)
Maximal size of one board: 133x290 cm in portrait or landscape format
This media is not recommended for outdoor use because it is not resistant to high temperatures in the sun

PVC-foam board 5 mm thick (Forex type)
Maximal size of one board: 133 x 290 cm in portrait or landscape format
This media is not recommended for outdoor use because it is not resistant to high temperatures in the sun

PVC-foam board 10 mm thick (Forex type)
Maximal size of one board: 133 x 290 cm in portrait or landscape format

6mm hanging holes above the panel, 15 mm from the edge

6mm holes at four corners of the panel, 15 mm from the edge

8mm holes at four corners of the panel, 15 mm from the edge

10mm holes at four corners of the panel, 25 mm from the edge

Custom-shaped cutting
The CutContour vector cutting path must be a closed and continuous line.
It will not be possible to cut different shapes separately within the same file.
Custom cutting that follows the shape of the path present in the file uploaded by the client.
Add a layer named "CutContour" above the "Artwork" layer and insert the cutting paths, assigning them the spot color "CutContour" (0,100,0,0).
A bleed of 0.2 cm from your visuals should be provided relative to this path.
The width of your shapes must be greater than 10 mm.
The cutting paths must be a closed line.

Opt for a 4 days production time (delivery excl.)