Your cart
There are no more items in your cart
Ciranova Aquapad Wood Stain Almond 1L per liter
€18.62
In stock
Product
Raw Linseed Oil in a 1-litre format, designed for the natural treatment and nourishment of bare or unfinished wood surfaces, both indoors and outdoors.
Specifications
- Derived from cold-pressed flaxseed, in its natural, unprocessed form
- Penetrates deeply into wood fibres to nourish, protect, and preserve the material
- Suitable for use on raw, untreated, or previously oiled wood surfaces
- Natural, solvent-free formulation with no added drying agents
- Available in a practical 1-litre container for easy handling and application
Usage
Apply raw linseed oil directly onto clean, dry, and bare wood using a brush, cloth, or roller. Work the oil into the grain and allow full absorption between coats. Multiple coats may be applied for deeper penetration and enhanced protection. Drying time is longer than boiled variants.
FAQ
- What types of wood is this product suitable for? Raw linseed oil is suitable for most bare and untreated wood types, including hardwoods and softwoods, used in furniture, flooring, joinery, and exterior woodwork.
- How many coats should be applied? Typically two to three coats are recommended, allowing each coat to fully absorb and dry before applying the next.
- How long does drying take between coats? Raw linseed oil dries slowly due to its unprocessed nature. Drying time can range from 24 to 72 hours depending on temperature, humidity, and wood porosity.
- Can this oil be used outdoors? Yes, raw linseed oil can be applied to exterior wood surfaces, helping to repel moisture and prevent drying or cracking of the wood.
- How should leftover product be stored? Store in a cool, dry place away from direct sunlight and heat sources, with the container tightly sealed to prevent oxidation and premature drying.
mvm-dt-2026-03
