Your cart
There are no more items in your cart
Signal Grey A Spray Paint RAL 7042 400ml
€19.42
In stock
Product
Déshuileur Dilunett 10L is a solvent-free, gel-based paint and coatings remover designed for exterior use, capable of stripping up to 8 layers of paint, varnishes, or stains from wood, metal, and plastic surfaces in a single application.
Specifications
- Gel formulation prevents running and allows precise application on both vertical and horizontal surfaces
- Made without solvents or paraffins; VOC-free and non-flammable
- Removes oil- and alkyd-based paints, varnishes, and stains; not suitable for aluminium, certain hardwoods, or two-component coatings
- Easily biodegradable; certified OECD 301 F
- Shelf life: 12 months in original unopened container
- Physical state: viscous liquid, creamy appearance, typical caustic soda smell
- Suitable for use with synthetic bristle brushes, flat blades, or power washers
- Coverage: Approximately 4 m² per litre
Usage
Apply Dilunett generously to the surface using a synthetic brush or flat blade. The gel penetrates and dissolves accumulated layers of finish, including paint, varnish, or woodstain—softening even deep pigments. Allow the product to work undisturbed; typical working time for oil- and alkyd-based coatings is 5–45 minutes, depending on the number of layers. After softening, simply rinse with water to remove residues. Repeat as necessary for thick or resistant coatings.
FAQ
-
What surfaces can I use Dilunett on?
Dilunett is suitable for most woods, metals (except aluminium), plastics, and stone. Avoid use on oak, chestnut, red cedar, marquetry, or aluminium. -
How many layers of paint can Dilunett remove at once?
It is formulated to strip up to 8 layers of oil- or alkyd-based coatings in a single application. -
Is this product safe to use indoors?
Dilunett is non-flammable and solvent-free, producing no toxic fumes, but is recommended for exterior use or very well-ventilated areas. -
How is Dilunett removed after application?
All residues wash away easily with water, leaving the surface clean and ready for recoating. -
Can Dilunett remove two-component or polyurethane coatings?
No, Dilunett is not suitable for two-component, baked, polyurethane, or rubber-based paints and varnishes.
mvm-dt-2025-07-20
