Call from Monday to Friday
8:30 a.m. to 5:30 p.m.
(BE) +32(0)71 25 85 81
(LU)+352 20 30 15 72
The LED COB Soft Strip is an 8mm-wide, 25-meter flexible lighting strip operating at 12V, delivering a smooth, uniform light line in Neutral White 4000K with no visible individual diodes.
Unroll the strip, cut at any 25mm-marked interval to the required length, and connect via the pre-wired leads to a compatible 12V DC power supply. Apply directly to clean, dry surfaces using the integrated adhesive backing for accent, task, or ambient indoor lighting.
What is the difference between COB and SMD LED strips? COB technology places multiple chips directly on the board, creating a uniform light line without visible dots, while also offering lower energy consumption and a longer operational lifespan compared to SMD strips.
Can this strip be cut to a custom length? Yes, the strip can be cut every 25mm at the clearly marked cutting points, allowing you to achieve virtually any required length within the 25-meter reel.
What power supply is required? This strip requires a 12V DC power supply. Calculate the total wattage needed by multiplying 6.4W per meter by the length of strip used.
Is this strip suitable for outdoor use? No. With an IP20 protection rating, this strip is intended for indoor use in dry environments only and should not be exposed to moisture or outdoor conditions.
Does the strip come pre-wired? Yes, the strip is pre-wired on both sides, simplifying installation and connection to your power supply or controller.
mvm-dt-2026-03
| Brand | Autre |
|---|---|
| Colour | 3000K (blanc chaud) |
| Length (m) | 25 |
| Description | COB SOFT |
| Power (W) | 325 |
| Protection Rating (PI) | 20 |
| Voltage (V) | F |
| Dimmable | oui |
