Product
SKAR Water-Based Wood Stain in Old Walnut is a 1-litre tinting solution designed to colour and enhance interior wood surfaces while preserving the natural grain.
Specifications
- Water-based formula for easy application and low odour
- Old Walnut shade delivers a warm, classic wood tone
- Compatible with absorbent wood surfaces such as pine, oak, and beech
- Quick-drying formulation suitable for interior use
- Easy clean-up with water after application
Usage
Apply the stain evenly onto clean, dry, and sanded wood using a brush, cloth, or sponge. Work in the direction of the grain. Allow to dry fully between coats. Apply additional coats to deepen the colour intensity as needed.
FAQ
- Is this stain suitable for outdoor use? This product is formulated for interior wood surfaces and is not recommended for exterior applications exposed to weather conditions.
- How many coats are needed? One to two coats are typically sufficient, depending on the desired depth of colour and the absorbency of the wood.
- How long does it take to dry? Drying time varies with temperature and humidity, but the surface is generally touch-dry within a few hours under normal conditions.
- Can it be used over previously treated wood? The wood surface should be bare, clean, and free of previous coatings for best absorption and colour results.
- How should leftover product be stored? Store in a tightly sealed container, away from frost and direct sunlight, to preserve the product's quality between uses.
mvm-dt-2026-03