Opt for a 2 days production time (delivery excl.)

Opt for a 4 days production time (delivery excl.)

High quality banner 550 gr/m² coated PVC banner.
Fire resistant B1.
Indoor and outdoor use - format up to 400 m².
Silk finish.
Maximum printable width 310 cm (if the smallest side exceeds 310 cm, the banner will be printed in several parts welded together).
Resistance of an eyelet placed with welded edge: approximately 50 kg.

High quality 290 gr/m² mesh PVC banner.
Indoor and outdoor use - format up to 400 m².
Matt finish.
Maximum printable width 310 cm (if the smallest side exceeds 310 cm, the banner will be printed in several parts welded together).
Resistance of an eyelet placed with welded edge: approximately 40 kg.

High-tenacity 325gr/m² polyester coated fabric –fire retardant M1-B1.
Indoor use - special exhibitions, trade fairs and showrooms - high definition rendering
Semi-matt finish.
Maximum printable width 245cm (if the smallest side exceeds 245cm, the banner will be printed in several parts welded together).
Split resistance: 140daN/5cm

Welded 5cm edge on the perimeter

Welded 5cm reinforced strip on the perimeter.
Increases the eyelet’s resistance by approximately 50% in comparison with a simple welded edge

Hems that hold a tube (not provided) having a maximum diameter of 50mm placed on the top and bottom of the banner

Hems that hold a tube (not provided) having a maximum diameter of 50mm placed on the left-hand and right-hand sides of the banner

To hang the banner: hems with tubes 50 mm diameter on the top and bottom sides of the banner

130mm flat sheaths to slide a tube of max. 50mm diameter arranged on the upper and lower sides of the banner. The sheath will be welded and sewn.

130mm left and right flat sheaths to slide a tube (not supplied) with a max. 50mm diameter. The sheath will be welded and sewn.

Metal eyelets with an inside diameter of 15mm placed every 50cm on the perimeter of the banner

Metal eyelets with an inside diameter of 15mm placed every 30cm on the perimeter of the banner

An eyelet with an inside diameter of 15mm placed in each corner of the banner

Free Clip OVIO with reinforcement tape, 3 pieces / meter
For indoor Use

For OVIO Master frames, the banner has to measure 13 cm less on Whidth et Height compare to the frame dimensions
For OVIO Light frames, the banner has to measure 10cm less on Whidth et Height compare to the frame dimensions

Eyelets every 30cm starting at 8cm from corner
OVIO Clips included

For OVIO Master frames, the banner has to measure 10 cm less on Whidth et Height compare to the frame dimensions
For OVIO Light frames, the banner has to measure 7cm less on Whidth et Height compare to the frame dimensions

Eyelets every 40cm starting at 8cm from corner
OVIO Clips included

For OVIO Master frames, the banner has to measure 10 cm less on Whidth et Height compare to the frame dimensions
For OVIO Light frames, the banner has to measure 7cm less on Whidth et Height compare to the frame dimensions

Eyelets every 50cm starting at 8cm from corner
OVIO Clips included

For OVIO Master frames, the banner has to measure 10 cm less on Whidth et Height compare to the frame dimensions
For OVIO Light frames, the banner has to measure 7cm less on Whidth et Height compare to the frame dimensions