Non-printed white banner

High quality banner 550 gr/m² coated PVC banner.
Fire resistant B1.
Indoor and outdoor use - format up to 400 m².
Silk finish.
Maximum printable width 310 cm (if the smallest side exceeds 310 cm, the banner will be printed in several parts welded together).
Resistance of an eyelet placed with welded edge: approximately 50 kg.

High quality 290 gr/m² mesh PVC banner.
Indoor and outdoor use - format up to 400 m².
Matt finish.
Maximum printable width 310 cm (if the smallest side exceeds 310 cm, the banner will be printed in several parts welded together).
Resistance of an eyelet placed with welded edge: approximately 40 kg.

High-tenacity 325gr/m² polyester coated fabric –fire retardant M1-B1.
Indoor use - special exhibitions, trade fairs and showrooms - high definition rendering
Semi-matt finish.
Maximum printable width 245cm (if the smallest side exceeds 245cm, the banner will be printed in several parts welded together).
Split resistance: 140daN/5cm

Welded 5cm edge on the perimeter

Welded 5cm reinforced strip on the perimeter.
Increases the eyelet’s resistance by approximately 50% in comparison with a simple welded edge

Metal eyelets placed every 50cm on the perimeter of the banner

Metal eyelets placed every 30cm on the perimeter of the banner

An eyelet placed in each corner of the banner

Hems that hold a tube (not provided) having a maximum diameter of 50mm placed on the top and bottom of the banner

Hems that hold a tube (not provided) having a maximum diameter of 50mm placed on the left-hand and right-hand sides of the banner