Usage
The SAV Pivot mâle NX T/NT E5 is designed for use in wooden window or door frames, enabling smooth and stable pivoting action as part of ROTO fitting systems for wood, PVC, and aluminium profiles.
Advantages
- Compatible with multiple profile types: wood, PVC, and aluminium
- Supports sash weights up to 150 kg for robust performance
- Pivots allow up to 180° opening angle for wide accessibility
- Reduced risk of condensation due to minimal drilling (5 mm) on the frame post
- Pivotal bearings can be pre-installed before frame assembly for efficient workflow; slightly limited by installation requiring precise alignment
Specifications
- Design: Narrow compass bearings and pivots; suitable for profile systems including 4/15-9, 4/18-9, 12/18-9, and 12/18-13 mm with or without cover seals. Right-hand opening configuration.
- Materials: High-strength metal components engineered by ROTO for durability in demanding environments.
- Durability & Standards: Engineered surface treatment allows finishing prior to final assembly; minimizes thermal bridging between bearing and weather protection. Adheres to industry standards applicable to professional fittings.
- Performance: Maximum supported sash weight is up to 150 kg; enables sash openings up to a full180° range. Installation depth at the bottom is only5 mm; lateral clearance21 mm ensures compatibility with tight installations.
- Differentiators: Pre-fitted bearing system reduces time on site. Limits condensation formation at critical interface points. Suitable replacement component for E20 system users upgrading to E5 technology.
How it works
This male pivot integrates into the designated recess of wooden window or door frames as part of a ROTO E5 tilt-and-turn fitting system. Once installed on the frame post—using just a shallow (5 mm) bore—the pivot supports secure hinge movement while minimizing thermal transfer and maintaining structural integrity through its narrow-profile design.
