Your cart
There are no more items in your cart
DL Chemicals Paracryl Deco White Acrylic Sealant 310ml
€4.52
In stock
Product
Soudal Soudafoam 2K (manual) is a professional-grade, two-component, self-expanding polyurethane foam designed for rapid curing and high performance. It forms a dense, durable foam structure, ideal for construction, installation, and insulation tasks where speed and reliability are essential.
Specifications
- Two-component PU foam technology; manual activation with dual 400ml canisters
- Professional quality; dense, strong foam with 70–80% closed cell structure
- Fast curing, not dependent on atmospheric moisture; can be trimmed after approx. 30 minutes at 20°C
- High form stability: minimal shrinkage (<3%), no post-expansion
- Excellent adhesion to most construction surfaces except PE/PP
- Thermal conductivity: 34 mW/mK; acoustic rating: 63 dB (ISO 717-1)
- Temperature resistance (cured): -40°C to +90°C
- Free from CFCs; non-hazardous to the ozone layer
Usage
Activate by turning the can’s base, mix thoroughly, and apply with the valve pointed down. The foam expands and cures rapidly without ambient humidity. Use for installing doors and frames, filling cavities, roof repair, acoustic insulation, and refrigeration system insulation. Trim excess after curing; use mechanical means for any hardened residue. Ensure full can usage within 5 minutes of activation.
FAQ
-
What materials does Soudafoam 2K adhere to?
It adheres strongly to most common building materials such as concrete, wood, metal, and plastics (excluding PE and PP). -
How long does it take for the foam to cure?
The foam can be trimmed after about 30 minutes at 20°C; complete curing occurs rapidly and is independent of humidity. -
Can this foam be used outdoors?
While the foam offers excellent structural and insulating properties, it is not UV-resistant and should be covered or protected when used outdoors. -
What is the coverage of one 400ml canister?
A 400ml canister yields approximately 10 litres of foam, filling about 8 metres of standard joint. -
How should any excess or spilled foam be removed?
Uncured foam can be wiped off with foam cleaner; cured foam must be removed mechanically.
mvm-dt-2025-07-07
