Call from Monday to Friday
8:30 a.m. to 5:30 p.m.
(BE) +32(0)71 25 85 81
(LU)+352 20 30 15 72
The LED COB Soft Strip delivers a seamless, uniform light line across 5 meters at 8mm wide, ideal for accent lighting, under-cabinet installations, and architectural detail work.
Peel the self-adhesive backing and apply the strip to a clean, dry surface. Connect via the pre-fitted mini AMP connector to a compatible 12V DC power supply. Cut at every 25mm marked point to achieve the exact length required for your installation.
What is the difference between COB and SMD LED strips? COB technology integrates multiple chips directly onto a single board, producing a uniform glow without visible dots, lower energy consumption, and a longer operational lifespan compared to standard SMD strips.
Can this strip be cut to a custom length? Yes, the strip can be cut every 25mm at the designated marked points, allowing precise length adjustment for any installation.
What power supply is required? This strip requires a 12V DC power supply. Calculate the total wattage needed based on 6.4W per meter multiplied by the length used.
Is this strip suitable for bathroom or outdoor use? No. With an IP20 protection rating, this strip is designed for dry indoor environments only and should not be exposed to moisture or outdoor conditions.
How is the strip connected? The strip comes pre-wired on both sides with a mini AMP connector, simplifying connection to a compatible 12V driver or controller without additional soldering.
mvm-dt-2026-03
| Brand | Autre |
|---|---|
| Colour | 3000K (blanc chaud) |
| Length (m) | 5 |
| Description | COB SOFT |
| Power (W) | 65 |
| Protection Rating (PI) | 20 |
| Voltage (V) | F |
| Dimmable | oui |
