TORX Headless Screw Ø7.5x92mm Box of 100

Product

Headless TURBO (TORX) Screw Ø7.5x92mm by Autre, designed for specialized frame assembly without anchors. Installs directly into substrates after a 6 mm pilot hole is drilled. Supplied in packs of 100 for demanding professional or industrial applications.

Specifications

• Headless design with TORX drive (TX 30) for secure engagement
• Manufactured in zinc-plated steel for enhanced corrosion resistance
• Diameter: 7.5 mm; Length: 92 mm
• Compatible with SDS-type drill bits for precise pilot holes
• Engineered for direct mounting into concrete, brick, or hard masonry without the need for additional plugs or anchors

Usage

Drill a 6 mm pilot hole using an SDS-type bit, align the screw with the prepared hole, and drive the screw directly into the substrate using a TORX-compatible screwdriver or bit. Suitable for structural assemblies where a flush finish is required, especially where anchors are not desirable or feasible.

FAQ

1. What materials can these screws be used with?
   They are designed for use in hard substrates such as concrete, brick, and masonry, allowing direct installation without anchors.

2. Is pre-drilling required?
   Yes, a 6 mm pilot hole must be drilled prior to installation for optimal performance and secure fixation.

3. What bit type is needed for installation?
   Use a TORX TX30 bit for driving the screw and an SDS drill bit for the pilot hole.

4. Are these screws resistant to corrosion?
   Yes, they are made of zinc-plated steel, offering good protection against corrosion in most environments.

5. Can these screws be used for visible surfaces?
   The headless design allows for a discreet finish, making them suitable for applications where the fastener should not protrude or be visible.

mvm-dt-2025-07-07