Turbo TX 30 Pan Head Screw Ø7.5x182mm / 100pcs

Product

The TURBO TX 30 Pan Head Screw Ø7.5x182mm is a special application fastener designed for direct frame installation without the need for plastic plugs. Suitable for structural assembly, this screw ensures robust fixation in construction and joinery.

Specifications

• Pan head design, TORX drive for optimal torque transfer
• Made from zinc-plated steel for corrosion resistance
• Box of 100 units; dimensions: Ø7.5mm x 182mm
• Requires pre-drilling with a 6 mm SDS-type drill bit
• Pan head offers a clean finish, distributes pressure evenly, and prevents sinking into the frame profile

Usage

Drill a 6 mm pilot hole using an SDS-compatible drill bit, then drive the screw directly into the substrate. The zinc-coated steel provides durable anchoring, and the pan head maintains material integrity—ideal for frames and assembly work without needing expansion plugs.

FAQ

1. What materials can these screws be used with?
   These screws are designed for use with frame materials in construction, including wood and some masonry, after pre-drilling.
2. Is a plastic plug required for installation?
   No plug is needed; simply pre-drill a 6 mm hole and drive the screw directly into the support.
3. What type of drill bit should be used?
   Use a 6 mm SDS drill bit for precise pilot holes before screw insertion.
4. Why is the screw head pan-shaped?
   The pan head provides a rounded, tidy finish, spreads pressure uniformly, and prevents damage or sinking into the frame.
5. How many screws come in a box?
   Each box contains 100 screws for bulk installation needs.

_{mvm-dt-2025-06-04}