Usage
This carbide drill bit with 18 mm diameter is designed for efficient drilling in concrete, natural stone, limestone, and masonry. It is suitable for use with percussion drills up to 1000 W in both professional and renovation settings.
Advantages
- High-performance drilling according to ISO 5468 standards
- Toughened steel body with U-shaped milled flute ensures rapid dust removal
- Carbide tip brazed at high temperature resists chipping and maintains cutting edge
- Wide, deep carbide insert base prevents point breakage during demanding tasks
- Optimized for anchor holes and general construction work on hard materials; may not be suitable for reinforced concrete containing heavy steel bars
Specifications
- Milled U-flute design in hardened steel body with brazed carbide tip (DIN 8039)
- Differentiated by compliance with ISO 5468 standards for percussion drilling safety and quality
- Total length: approx. 160 mm | Working length: approx. 100 mm | Diameter: 18 mm | Recommended max drill power: 1000 W[2]
- Large seating of the carbide plate increases flexural strength and tool lifespan[2]
How it works
The drill bit’s robust tungsten carbide tip penetrates hard mineral materials while the U-shaped flute rapidly channels debris out of the hole. This enables precise, clean drilling in masonry or stone when used with a compatible percussion drill.
