Usage
This carbide drill bit with a 10mm diameter is designed for precision drilling in concrete, natural stone, masonry, and limestone using a percussion drill up to 1000 W. Ideal for installing wall plugs or creating clean anchor holes in construction materials.
Advantages
- High wear resistance thanks to a carbide tip engineered according to DIN 8039 standards
- Optimized U-shaped flute ensures rapid removal of drilling dust for efficient work
- Toughened steel body delivers enhanced flexural strength and reduced breakage risk
- Brazed at high temperature for secure bonding of the carbide insert and longer service life
- Sized specifically for common applications in construction and renovation projects; requires percussion drill compatibility (may be less suitable with low-power tools)
Specifications
- Toughened steel shank with U-milled flute and large, deep-set carbide plate tip conforming to ISO 5468/DIN 8039 standards
- Engineered to resist chipping at the point; maintains sharpness through repeated use on hard materials such as concrete or natural stone [1][5]
- Total length typically around: ~100–160 mm (varies by manufacturer); working length ~60–100 mm; diameter: Ø10 mm [3][9]
- Differentiated by precise centering capability and effective dust evacuation during drilling operations [7][3]
How it works
The bit is mounted on a compatible percussion or rotary hammer drill. Its tungsten carbide tip penetrates tough substrates, while the fluted design channels debris away from the hole. This results in accurate, dimensionally stable holes suitable for anchors and fastenings.
