Product
The Pivot-Star cruciform mounting plate is designed for particleboard screws with a Ø2.5mm drilling, offering direct height adjustment and a 6mm distance, compatible with frame cabinets and PCE applications.
Specifications
- Cruciform design engineered for particleboard screw fixing with a Ø2.5mm drill hole requirement
- Direct height adjustment mechanism for precise and efficient installation
- 6mm distance configuration suited for frame cabinet and PCE mounting systems
- Compatible with the Pivot-Star hinge system for reliable and consistent alignment
Usage
Attach the mounting plate to the cabinet frame using particleboard screws through the Ø2.5mm pre-drilled holes. The cruciform shape allows direct height adjustment, ensuring accurate hinge positioning on frame cabinets and PCE structures with a consistent 6mm offset distance.
FAQ
- What drill bit size is required for installation? — A Ø2.5mm drill bit is required to prepare the holes before fixing the mounting plate with particleboard screws.
- Is this plate compatible with all hinge types? — This mounting plate is specifically designed for use with the Pivot-Star hinge system and may not be compatible with other hinge ranges.
- What does the 6mm distance refer to? — The 6mm distance refers to the offset between the mounting plate and the cabinet frame, ensuring correct hinge alignment and door clearance.
- Can this plate be used on solid wood cabinets? — This plate is optimized for particleboard panels; use on solid wood is possible but the screw specifications should be verified for adequate holding strength.
- Does the plate allow adjustment after installation? — Yes, the direct height adjustment feature allows fine-tuning of the hinge position even after initial installation, simplifying door alignment.
mvm-dt-2026-03
